Detailing world is rapidly coming up with new innovations every day. New products and techniques are being introduced to attract customers. Paint protection film being one of them, let us share some tips on how to apply it.

Prep the Garage

To begin with the process of installing car bodywork protection film, you first need to prepare the garage. It is recommended to detail your car in a location that is as air tight as possible so that the dust particles and contaminants do not stick to the car while you are preparing and detailing it.

You will need to wipe the floor, clean everything which has dust or paint particles on it and remove everything that can come in your way while you work. This process may be overlooked by a lot of detailers out there, but once cannot stress the importance of cleaning the space where you are getting your car protected.

So make sure that the area is properly cleaned so that the hard work is not ruined. Visit a couple of detailing centers to observe for yourself and choose accordingly.

Prep the Car

Preparing the car is equally important as preparing the garage. These two processes will define the quality of your work, especially in the case of applying paint protection film.

You will first need to make sure that you get rid of the car from any contaminants and dust particles. Most of the times, these contaminants and dust particles are not visible to the naked eye, so you will have to use different microscopic tools to dig them out.

There are different steps involved in preparing your car and you cannot ignore and neglect even one of them. You should make sure that the car is cool and dry before you start.

A hot car will not be a good idea to work on. Also consider covering up parts of the car that you are not working on at the moment, such as plastic, to avoid any unnecessary negative effects.

The Right Tools and Products

Having the right tools and products is another thing on the list. Just like you should know the difference between factory and aftermarket window tint, same is the case with the tools. Every detailer has a different preference when it comes to brands and the same goes for customers. Choosing to go with different products may not be a good idea as the chemical bonding of the detailing products may not agree with each other. Therefore, it is always recommended to go for one brand and use its products only.

If the brand of polish is different from the brand of wax, it may not work out for you. Car detailing, let alone applying PPF on a car is not an easy thing. It requires experience, knowledge, patience and a lot of time. You can consult professionals out there, who can provide you with tips and tricks so that you do not disappoint your customer.

Applying Paint Protection Film

Applying paint protection film requires accuracy and speed to avoid blisters. You need to make sure that the important materials are within the arm’s reach. In order to prevent the strong adhesives sticking to your fingers, wet your hands with the solution. Proceed on laying the film over clean table, remove the liner and spray the solution on the exposed adhesive. Also remember to spray the solution on the area or the part where you intend to apply the protection on.

Slide the film to the area you wish to apply, the purpose of the sliding action is to prevent and avoid bubbles trapped between the film as well as the car’s surface. Get a squeegee and use it to make sure that the film is flatten and the remaining solution is removed. If in case you notice any bubbles, you can solve this by working the squeegee rapidly towards the edges. Proceed to wipe the surface to remove any excess liquid and repeat the process on the entire car.

Car bodywork protection film installation is tough. There are many paint protection film installers Springfield out there. You will have to carefully observe the pre-requisites mentioned above to choose the best one. Paint protection film process is an expensive task too. Therefore, if you are splashing out quite a bit of money, make sure that it goes to the right one.


Leave a Reply

Your email address will not be published. Required fields are marked *
You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>