A fridge with overflowing ice is easy to fix but that does not mean that it is left ignored. There are several reasons behind overflowing ice and you can fix it without any refrigerator ice maker repair. It could be as simple as the ice tray not being properly positioned. On the other hand, you do not want your food items to experience the dreaded freezer burn as well. Since both issues are a normal occurrence in refrigerators, therefore, we are going to address them in this blog. Let’s begin!

Avoid Ice Maker Overflowing

Water Inlet Valve

If you were not aware, the water inlet valve requires at least 20 psi to properly shut-off. Therefore, if the water pressure happens to be low, the valve will not close once the power is cut off. As a result, the valve will leak water into the ice maker, and eventually, the ice maker will start overflowing. Make sure that the water pressure is at least 20 psi. If you inspect and find out that the water pressure is sufficient, then there is a problem with the water inlet valve. It might be that the valve either does not close properly or remains open causing the valve to leak water. In such a case, you will need to replace the water inlet valve.

Low House Water Pressure

The water inlet valve makes use of the house water and provides it to the dispenser and the refrigerator ice. As mentioned previously, the water pressure should be a minimum of 20 psi. If the water pressure in your house is low, the valve may not shut off properly even when the power is shut off. Therefore, the valve will direct the water into the ice maker, resulting in your ice maker overflowing. Check and make sure that the water pressure is appropriate.

Check The Feeler Arm

Check the feeler arm to make sure that it is in perfect condition. If it is broken then the ice maker will not know that the ice bucket is full and it will continue to produce ice and eventually lead to overflowing. Make sure that you get the right replacement using the model number.

Avoiding Freezer Burn

Don’t Skimp The Freezer Bags

Most often, freezer burns are caused due to people storing food items in the wrong storage bags. It is always suggested that the food items be stored in freezer-grade bags. These bags are designed to prevent freezer burns. Furthermore, since they are cheap as well, it will cost less to replace them as compared to the freezer burnt meat. Moreover, try wrapping the food items in plastic wrap or wax paper and then insert it inside a zip bag. However, make sure that the items are not too big for the bags.

Observe Refrigerator Temperature

Even if you are wrapping the food items the right way and placing them inside freezer bags, there is still a possibility of freezer burns. If you observe that the temperature inside the fridge is above zero degrees Fahrenheit, then there are high chances that the fridge is the culprit. If the temperature is too high, the water will melt and freeze on food items. As a result, the food items will experience freezer burns and it will cause them to appear nasty and unappetizing.

Now that you are aware of the tips to prevent both ice maker overflowing and burns, you must practice them whenever relevant problems arise. If you are still not able to figure out the problem, you might want to consider calling a professional.

How To Choose An Appliance Repair Service?

Whether you need a repairer for home appliances or commercial equipment, always follow these guidelines for selecting one.

Look for credibility. If they are well reputed and known in your locality, there would be no problem for you selecting them. Moreover, notice their quotes too. If they are offering services too cheap, they may be cutting corners in some areas, which means they would be unreliable. Some appliance repair Fairfax services also provide guarantee for some repairs so ask for it to learn which repairs are included in it. Lastly, keep a maintenance schedule of your appliances to avoid costly repairs.

Leave a Reply

Your email address will not be published. Required fields are marked *
You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>