Tips to start your own tree removal company

Tips to start your own tree removal company

Are you an arborist who is planning to start a tree removal business? Or perhaps you are just curious about how tree removal companies are set up? In either case, you have certainly arrived at the right place.

In this article, we put together a range of tips that can help you in setting up a similar company for yourself.

Note that running a tree services can be a lucrative career. This is because trustworthy tree removal companies have a high demand throughout the world. And in countries such as US where there are a lot of trees per square km, such companies are a big requirement.

Though, it depends on a number of factors such as the demand in your area and the number of competitors you have. Once you are sure that this business is right for you, you are ready to take the first steps.

What it takes to run a tree removal company?

In this article, we put together certain tips that will tell you what it takes to run a tree removal company. These include:

Covering the basics

First of all, you must cover some basics regarding such companies. For instance, you must consider the capital that you require to start such a business. After all, you will need some tools. Furthermore, you may also have to collaborate with a crane rigging company so that the fallen trees can easily be removed.

Such things have a cost and so, your capital will depend on the services that you provide to your customers. In case you do not provide tree moving services, then it will be up to the customer to hire a crane.

However, providing an in-house crane moving service for the trees for an additional cost is always a plus. Though that comes later down the road and is not an absolute requirement for you in the beginning.

Getting licenses

In some states, tree removal companies require a license and hence, you must reach out to the specific authorities for that. In case you are an arborist, then it should not be difficult for you to get the license.

However, if you are a layman, then you may be required to complete certain certifications before you can start such a business.

Learning the ropes

Having some practical experience under your belt is always a plus. So, before you start your own firm, we suggest you do an internship with an existing company to learn their ways. This way you will also learn about tree diseases.

Companies are often welcoming to interns because they can of course, use their services and help. While at the same time, you will be getting the experience that you need. So, it is a win-win case for both of the parties.

Pricing for profit

Remember to price your service in a way so that it profits you. Your main goal is not to break-even, but to get profit out of your work. So, always think of it that way rather than just pricing without any profits.

Do not worry because every other company has similar pricing policies. So, do not hesitate about it and try to be bold. For as long as you offer unmatched service, you will have plenty of customers regularly.

Conclusion

Lastly, we suggest you take a look at different tree services MD operating in your area. Look at the services they offer and think what you could do to be different and better. For as long as you have the selling factor, customers will prefer you over other companies. This always go a long way into developing a consistent buyer base and this is how companies become successful.

How to cut a tree?

How to cut a tree?

Let us go straight into the different aspects of tree cutting.  I wish to tell you in advance that safety must be given top priority as tree cutting can be fatally dangerous and can cause serious injuries and damages to body parts. In my opinion a novice should not proceed to cut a 60 feet tall tree. It has to be entrusted to local tree removal companies. As a first step you may go for cutting trees which are less than 20 feet in height.

Tools and protection for tree removal

For protecting your body from probable damages and injuries every person who endeavor in tree cutting must wear a protective gear consisting of the following

  • Goggles for eye protection
  • Hard hat for protecting the head
  • Steel toed boots and chaps for leg protection
  • Working gloves for hand protection

Important tools needed for engaging in tree cutting activity are detailed below.

  • Chain saw
  • Ladder
  • Wedge(s)
  • Rope
  • A helper

Assessing the tree and the surrounding

As a first step to tree cutting the site of the tree has to be inspected so that answers to the following questions can be obtained. These answers will help you to understand the severity of the work that you are going to perform.

  • Whether the tree is leaning? If so in what direction?
  • What are the probable areas where the tree is expected to fall aka dropping zone?
  • Is the drop zone safe? Is there any living beings or building that may get damaged?
  • What is the height of the tree and how it will be accommodated in the drop zone?
  • Is the drop zone inclined or level?
  • Is the trees crown correspond to the tree’s slanting?
  • Can the tree get struck up in other trees during its falling?
  • Whether the tree has cracks, loose bark, splits, rotted sections etc?
  • What is the direction and strength of the wind in that area?

Tree cutting services

Get yourself ready for escape as soon as the tree starts falling. At least 30 feet path has to be made clear and never turn your back toward the tree. If your exit route is at an angle of 45 degrees to the falling direction of the tree, it will help you to be safe from the kick back of the butt of the tree.

Direct the tree

It will be easy to fell a tree in the leaning direction. With little effort one can  find a tree service employee who will be happy to help you in your DIY activities  and some rope one can guide a tree to fall to the dropping zone though the tree is not slopping in that direction.

Face cut

Face cut determine the direction in which the tree is going to fall. For this cut a scarf on the tree in the drop zone’s direction. This cut should be inclined at an angle of 45 degrees and should not go beyond 1/3 of the width of the tree. Next cut will be at the in the bottom of the first cut and this cut is without any angle.  End of both the cuts should meet at the same location.

Back cut

The back cut starts from the other side of the notch.  This cut should come one to two inches above the corner of the notch. The uncut portion between the above two cuts should be around 1/10 of the diameter of the tree. Find the best tree services silver spring md for this.