It can be very tricky to wash affordable Persian rugs. Do this process incorrectly, and you will end up destroying your beautiful Persian carpets. To avoid it from happening, here are a few useful advice you have to keep in mind:

Buy persian rugs

When you wash these rugs, the first thing to do is check whether the colors will bleed once they got wet. It is a must to do the checking in a spot in the carpet that will not be likely seen easily since you will be making the colors bleed into one another.

Saturate Rugs with Pet Urine Problem

If you are dealing with a pet urine issue, you have to saturate your carpets in water even though it might be plain water only. You have to submerge your carpet, and wash it using a pet urine removal system to ensure that all the urine has been completely removed from the rug.

Avoid Harsh Cleaners

Make sure that you don’t use harsh cleaners such as bleach when you wash your Persian rugs. You must only use those mild detergents for cleaning the fibers of your rug.

Dry Before Use

You have to ensure that your carpet has completely dried up before you use it on your floor.

Restore Before Cleaning

There are times when you will have to restore your rug first before you proceed to cleaning it. You might want to look for any tiny tears in your rug which require restoration, and have it fixed before it turns into a more serious problem.

Cleaning Stains from Persian rugs

Never, ever use scrub brush on pile for removing stains, especially when you have silk rugs va. If there is a stain, you will want to use a white paper towel, soft cloth, or a soft bristled toothbrush. Apply some cleanser using the soft cloth. This can be done through pressing a dampened cloth to the stained area. Avoid rubbing the spot at all. Just press the damp cloth to the spot, and use your white paper towels for absorbing any moisture, and picking up the staining agent. Press the white paper towel firmly then repair this process until no moisture or discoloration can be seen on your towels. When a stain is very stubborn, you can always use a brush for gently separating the fibers, hoping that the staining agent is going to turn loose.