Reasons to get auto paint protection film

Reasons to get auto paint protection film

If you do not have auto paint protection on your car, you can expect that it will lose its resale value and good appearance sooner or later. There are a number of factors that can be devastating for your car. These include hash cleaners, tree sap, gasoline, scratches, sunlight, and bird dropping. Since these factors apply to all of us, it is incredibly necessary for every serious car owner to get car bodywork protection film.

They say that the car is a portrayal of one’s self-image. In that sense, it is not just a way of travelling but gives one a good sense of ownership. At the same time, a poor car appearance can be detrimental for your own self-respect. You would certainly not want to pull over with a dirty car at your new work-place, would you?

Why should you get car paint protection film?

Simply put, car paint protection films act as a protection to preserve the paint of your car. These are thick films that are made of urethane plastic and protect the original paint of the car from contaminants, chips, and scratches. Furthermore, it can be applied to the entire vehicle. Though, most of the times, it goes on surfaces that are painted.

As for the windows and glass parts, people prefer to get auto glass tinting.

In this article, we talk about all the reasons why car paint protection is so important. These include:

Keeps the car shiny and new

Paint protection films act as a permanent protection coat on the paint which helps you retain the shiny look of your car for a longer period of time. After getting a protection film installed, you will notice that the car’s paint will not fade away. Instead, your car will have a very glossy appearance.

Retains resale value

When users buy a car, they focus a lot on its appearance. Let’s say you have a properly working car, but it is not good looking enough, as a result of this, the resale value of the car will be much lower. Hence, it is incredibly important for you to retain the look of your car as best as you can.

Easier to clean the car

Paint protection films repel the dust to prevent build up on the exterior of your car. This makes the job of cleaning easier because all you need is a soft cloth to wipe dust off. Water will not always be needed. This can also reduce the need of expensive car washes every single time.

Protection from environmental conditions

UV Rays from the sun can be very harmful for the car’s body paint. If you drive your car in the sunlight to often, the sunlight will end up ruining your car’s paint after a few months. However, if you have car bodywork protection film installed, your car will stay protected from these conditions. Other conditions that it can protect against include moisture, acid rain, burns, rust, and a lot more. Hence, there is no doubt that installing a urethane protection film on your car will be one of your best decisions ever.

Conclusion

If you have finally decided t o install car paint protection film, make sure that you are choosing the best clear car protection film installers Springfield only. In case you go for the less reliable contractors, you will simply be wasting your money. This is because a big number of scam businesses are operating in this field. So, it is important to read up reviews before finalizing your choice. Also, do not forget to ask for recommendations from people that you trust.

How To Apply Car Paint Protection Film

How To Apply Car Paint Protection Film

Detailing world is rapidly coming up with new innovations every day. New products and techniques are being introduced to attract customers. Paint protection film being one of them, let us share some tips on how to apply it.

Prep the Garage

To begin with the process of installing car bodywork protection film, you first need to prepare the garage. It is recommended to detail your car in a location that is as air tight as possible so that the dust particles and contaminants do not stick to the car while you are preparing and detailing it.

You will need to wipe the floor, clean everything which has dust or paint particles on it and remove everything that can come in your way while you work. This process may be overlooked by a lot of detailers out there, but once cannot stress the importance of cleaning the space where you are getting your car protected.

So make sure that the area is properly cleaned so that the hard work is not ruined. Visit a couple of detailing centers to observe for yourself and choose accordingly.

Prep the Car

Preparing the car is equally important as preparing the garage. These two processes will define the quality of your work, especially in the case of applying paint protection film.

You will first need to make sure that you get rid of the car from any contaminants and dust particles. Most of the times, these contaminants and dust particles are not visible to the naked eye, so you will have to use different microscopic tools to dig them out.

There are different steps involved in preparing your car and you cannot ignore and neglect even one of them. You should make sure that the car is cool and dry before you start.

A hot car will not be a good idea to work on. Also consider covering up parts of the car that you are not working on at the moment, such as plastic, to avoid any unnecessary negative effects.

The Right Tools and Products

Having the right tools and products is another thing on the list. Just like you should know the difference between factory and aftermarket window tint, same is the case with the tools. Every detailer has a different preference when it comes to brands and the same goes for customers. Choosing to go with different products may not be a good idea as the chemical bonding of the detailing products may not agree with each other. Therefore, it is always recommended to go for one brand and use its products only.

If the brand of polish is different from the brand of wax, it may not work out for you. Car detailing, let alone applying PPF on a car is not an easy thing. It requires experience, knowledge, patience and a lot of time. You can consult professionals out there, who can provide you with tips and tricks so that you do not disappoint your customer.

Applying Paint Protection Film

Applying paint protection film requires accuracy and speed to avoid blisters. You need to make sure that the important materials are within the arm’s reach. In order to prevent the strong adhesives sticking to your fingers, wet your hands with the solution. Proceed on laying the film over clean table, remove the liner and spray the solution on the exposed adhesive. Also remember to spray the solution on the area or the part where you intend to apply the protection on.

Slide the film to the area you wish to apply, the purpose of the sliding action is to prevent and avoid bubbles trapped between the film as well as the car’s surface. Get a squeegee and use it to make sure that the film is flatten and the remaining solution is removed. If in case you notice any bubbles, you can solve this by working the squeegee rapidly towards the edges. Proceed to wipe the surface to remove any excess liquid and repeat the process on the entire car.

Car bodywork protection film installation is tough. There are many paint protection film installers Springfield out there. You will have to carefully observe the pre-requisites mentioned above to choose the best one. Paint protection film process is an expensive task too. Therefore, if you are splashing out quite a bit of money, make sure that it goes to the right one.

.